a h d g j s f
 

Standard Trunking

  • Single Compartment Lengths and Accessories from 50x50mm to 150x150mm ex-stock.
  • Non-Standard and Multi-Compartment Trunking manufactured in 3 days.
  • Turnbuckle, Screwbush and Security Screw Lid Fixing available.
  • Complies to BS EN 50085. Standard Trunking was previously manufactured to BS 4678: Part 1 1978. This standard has now been withdrawn and replaced with BS EN 50085.
  • Standard Finish – Galvanised to BS EN 10346. Previously BS EN 10327 which is now withdrawn and superseded by BS EN 10346
a

Cable Tray

  • SVL Range - Standard Vertical Flange Cable Tray
  • MRL Range – Medium Duty Return Flange Cable Tray
  • HRL Range – Heavy Duty Return Flange Cable Tray
  • Lengths and Accessories in all sizes available ex-stock.
  • Standard Finish – Galvanised to BS EN 10346. Previously BS EN 10327 which is now withdrawn and superseded by BS EN 10346
a
a

Basket Tray

  • WB30 Range – Medium Duty Basket Tray.
  • WB55 Range – Heavy Duty Basket Tray.
  • WB105 Range - Deep Heavy Duty Basket Tray.
  • Standard Finish – Galvanised wire with a coating equivalent to BS EN 10346
a
a

Cable Ladder

  • L4 Range – 100mm Sidewall Cable Ladder.
  • L5 Range – 125mm Sidewall Cable Ladder.
  • L6 Range – 150mm Sidewall Cable Ladder.
  • Standard Finish – Galvanised to BS EN 10346. Previously BS EN 10327 which is now withdrawn and superseded by BS EN 10346
a
a

Channel Support Systems

  • Plain and Slotted Channel sections in 3 and 6 metre lengths.
  • 41 x 41mm / 41 x 21mm / 41 x 82mm configurations.
  • Extensive range of bracketry.
  • Extensive range of fixings.
  • Complete range available ex-stock.
a
a

Lighting Trunking

  • 50 x 50mm Clip Lid Trunking in 5 metre lengths.
  • Extensive range of bracketry.
  • Extensive range of fixings.
  • Complete range available ex-stock
a
a
Floor Trunking

  • Flush Floor Trunking System – Installed in the screed with the 3mm lid always accessible.
  • Under Floor Trunking System – Buried under the screed with service outlet and junction boxes.
  • Raised Floor Trunking System – For raised floor installations.
a
a

Service Outlet Modules

  • Available in 2, 3 and 4 compartment variations.
  • Outlet plates available to suit all power and data sockets.
  • Complete range available ex-stock.
a
a

Perimeter Trunking

  • Skirting Trunking System with full range of accessories.
  • Dado Trunking System with full range of accessories.
  • Bench Trunking System with full range of accessories.
  • Standard Finish – Galvanised to BS EN 10346. Previously BS EN 10327 which is now withdrawn and superseded by BS EN 10346
  • Alternative Finish - Epoxy powder Coated finish to BS4800 in a colour of your choice.
a
a

Bench Trunking, Pedestal Outlet Boxes, Flush Wall Trunking

  • Bench Trunking System with full range of accessories.
  • Pedestal Outlet Boxes in single and double-sided configurations.
  • Flush Wall Trunking System with full range of accessories.